PET foam

Yueke PROCORE T90 is a regenerative polymer foam for closed hole thermoplastic. It is excellent for fire, anti-smoking and anti-virus. It has excellent mechanical and anti-fatigue properties, stable chemical properties, uv protection and low water absorption. In the high temperature process conditions and after curing, the chemical property is stable, no later expansion, suitable for all resin and processing technology, it is the ideal core material to manufacture the fireproof sandwich structure.

Performance:

Ø excellent FST performance (FAR 25.853; NF 16.101; DIN 5510).

Ø good fatigue resistance

Ø is applicable to all kinds of resin and laminating process

Ø as high as 100 ℃ / 212 ℉, excellent thermal stability for a long time

Ø as high as 150 ℃ / 302 ℉, the best thermal stability

Ø high compressive strength and modulus

Ø extremely low mechanical value error

Ø adhesion strong sex (panel and core material of adhesive)

Ø excellent chemical stability

Ø not bibulous, ways to expand, degassing

Application:

Rail transit: floor, side wall, engine, internal structure, roof, hood

Ship: deck, internal structure, superstructure

Industry: cover plate, container, X-ray station, sports equipment

Architecture: ceiling, covering, dome, movable house

Process:

Contact shaping (manual/jet) - vacuum diversion - resin perfusion/injection (VARTM/RTM) - bonding - pretreatment - mold molding (GMT, SMC) - heat molding

Processing methods, other sizes and smaller errors are based on customer requirements

1) the minimum value is based on the DNV certificate; The test sample baidu is 20mm (the sample thickness of the tensile properties is 10mm, and the sample thickness of the compression modulus is 40mm).

2) the alternative width is 1220mm and the optional length is 2440mm

3) preliminary data

AIREXR T92 is a regenerated polymer foam for closed hole thermoplastic. The mechanical properties are excellent and the sex ratio is extremely high. It has excellent anti-fatigue property, stable chemical property, uv protection and low water absorption. Under the condition of high temperature process and curing after all can keep steady state heat, ways to expand, applicable to all resin and processing technology, is to create static/dynamic load and high temperature resistant light sandwich structure of ideal core material.

Performance:

Ø is applicable to all kinds of resin and molding process

Ø process temperature can be as high as 150 ℃ (302 ℉)

Ø fatigue resistance is strong

Ø chemical stability

Ø yi adhesive (panel and core material of adhesive)

Ø better long-term thermal stability (up to 100 ℃ / 212 ℉)

Ø not bibulous, ways to expand

Ø environmental protection, advanced materials check kingdee system (each foam sheet are readable bar code)

Application:

Wind: blade (shear web and shell), cabin cover

Ship: hull, deck, superstructure, bulkhead, internal structure, gunwale

Industry: cover plate, container, local enhancement structure, X-ray station, sports equipment

Process:

Contact shaping (manual/jet) - vacuum diversion - resin perfusion/injection (VARTM/RTM) - bonding - pretreatment - mold molding (GMT, SMC) - heat moldin